Water Softener Professionals	About Us \| Contact Us Crown water softeners
Home \| Water Softeners \| Benefits \| Drinking Water Filtration \| Three Way Taps Dry Skin/Eczema \| Ask Ian \| Glossary/Links \| Service

Crown Block Salt Water Softeners

Technical Specification

Softener Details
Resin Volume	2 x 4.3 Litres
Resin tank dimensions twin tanks	140mm diameter x 400mm high
Salt Storage Capacity	2 x 4kg blocks
Operating weight	32.5kg
Shipping weight	20kg
Connections
Inlet	3/4" Bsp male parallel
Outlet	3/4" Bsp male parallel
Overflow	1/2" Hose connector
Drain	3/8" outside diameter tubing
Operating Conditions
Max operating water pressure	8 bar
Min operating water pressure	1 bar (with water flowing)
Max operating water temperature	20° C
Min operating water temperature	Protect from freezing
Overall Dimensions
Height	490mm
Depth	460mm
Width	212mm
Overall Data
Total hardness capacity	362g as CaCo³
Salt used per regeneration	300g
Salt efficiency	71%
Maximum flow	50 litres
Pressure loss	1 bar at 30 litres per minute
Regeneration water volume	17 litres
Maximum flow rate to drain	1.9 litres per minute
Minimum regeneration time	9 minutes
Softened water hardness	< 1 mg per litre
All above specifications may be subject to change without notice

161 Westfields, St. Albans, Herts AL3 4JU
telephone: 01727 750 060 fax: 01727 764 455